info@altec.de
Contact:
Mobile loading bridge HFB 55/60
The mobile aluminum loading ramps HFB 55 and HFB 60 are used to compensate for small height differences between trucks and loading docks and are suitable for vehicles with pneumatic tires. The maximum load capacity is 4,0 t (HFB 55) and 1,2 t (HFB 60) per unit.
The HFB 55 and HFB 60 are mobile aluminum loading bridges for use in loading areas between trucks and ramps with small height differences. They are used when a safe crossing is required for roll containers, forklifts, or other transport vehicles.
The loading ramps are designed for vehicles with pneumatic tires. Due to their design, they are not suitable for use with rubber or steel tracks.
The driving surface consists of a non-slip aluminium surface, which ensures safe driving and walking.
The HFB 55 is available in a length of 550 mm and the HFB 60 in 575 mm, each in four widths from 1250 mm to 2000 mm.
The load-bearing capacity is a constant 4000 kg per piece for the HFB 55 and 1200 kg per piece for the HFB 60.
Depending on the width, the weight ranges between 23 kg and 36 kg (HFB 55) and between 17 kg and 27 kg (HFB 60).
Structurally, the loading bridges have a one-sided stop for secure positioning on the vehicle or ramp.
Variations arise from the different widths.
Optional equipment is not available for this model series.
HFB 55 / HFB 60
| Article no. | Length (mm) | width (mm) | Height difference (mm) | Load capacity (kg/piece) | Weight (kg/piece) |
|---|---|---|---|---|---|
| 306.01.002 | 550 | 1250 | -28–+60 | 4000 | 23 |
| 306.01.003 | 550 | 1500 | -28–+60 | 4000 | 27 |
| 306.01.004 | 550 | 1750 | -28–+60 | 4000 | 32 |
| 306.01.001 | 550 | 2000 | -28–+60 | 4000 | 36 |
| 306.04.000 | 575 | 1250 | -23–+40 | 1200 | 17 |
| 306.04.001 | 575 | 1500 | -23–+40 | 1200 | 19 |
| 306.04.002 | 575 | 1750 | -23–+40 | 1200 | 23 |
| 306.04.003 | 575 | 2000 | -23–+40 | 1200 | 27 |
No videos are currently available.
